Lift cables carry serious load alongside the springs. When one frays or snaps, we replace both cables as a pair and check the drums for wear.
Matching wear on both cables means both get inspected and typically replaced together.
Cable replacement without a drum check is an incomplete repair, so we always look at both.
Our technicians are trained to safely release and reset tension when cables are involved, not just the springs.
We carry the common cable lengths and gauges for most residential door sizes.
Each service below is handled by a technician trained specifically for this kind of repair, not a generalist guessing at it.
We replace the snapped cable and its pair, then verify even tension across both sides.
Fraying cable strands are a warning sign of imminent failure. We replace before it snaps and drops the door unexpectedly.
A cable that's jumped its drum groove can jam the door mid-cycle. We reset it correctly and check for the underlying cause.
We match new drums to the correct diameter for your door's cable length requirements.
Correcting an uneven lean means addressing the cable, checking the spring pair, and confirming the track is still square.
Tell us if the door is hanging crooked or jammed, that detail helps us prioritize the call correctly.
Cable stock on the truck means most calls avoid a second trip for parts.
We check both cables and the drums together, then quote a flat price covering the full fix.
Cables replaced, tension balanced, and the door tested level before we leave, backed by written warranty.
“Door was hanging at an angle after a cable snapped. They replaced both cables and it's perfectly level now.”
“Explained why replacing just one cable wasn't a real fix. Makes sense once you see the wear pattern.”
“Same-day fix on a Saturday, cable stock right there on the truck.”
An uneven hang points to a broken cable, a failed spring, or a bent track pulling the panel off-square.
Replacing just one often leads to a second failure soon after. We're upfront about that tradeoff.
Yes, a door hanging on a single cable or spring can drop unexpectedly and should not be operated until repaired.
Usually a bent or worn drum groove, sometimes combined with a slightly loose cable tension setting.
Pricing depends on cable length, gauge, and whether the drums also need replacing, confirmed as a flat number before work starts.
Standard cable and drum stock means same-visit repair is the norm, not the exception.
Call now for a real appointment window, not a callback promise.
☎ Call +1-831-293-1591From one side of Maltby to the other, dispatch is built to reach you quickly.
Embedded Map Placeholder for Maltby, WA